Design Points and Application of Large-scale Port Belt ConveyorTime of issue : 2020- 03-27
Overview: With the development of the national economy, the volume of large-scale dry bulk cargoes such as coal, ore, sand, bulk grain, and chemical fertilizers in water transportation has increased year by year. Develop in the direction of low energy consumption. Port transportation machinery plays a key role in the specialization of bulk cargo terminals. Belt conveyors, as one of the important components of port transportation machinery, have laid the foundation for the reliable, efficient, energy-saving and economic operation of port transportation machinery. Combined with the port transportation machinery process requirements and characteristics, the design points of the port belt conveyor are emphasized and the application is briefly listed.
Daily operation regulations and maintenance of belt conveyorTime of issue : 2020- 03-27
Whether the tightness of the conveyor belt is appropriate, whether the transmission components such as bearings and gears are intact, whether the safety protection device is safe, reliable and complete, and whether the equipment is grounded properly.
Should the transformation of pipe-type machine truss support be borrowed from existing buildings?Time of issue : 2020- 03-27
The most difficult part of the pipe belt machine in the transformation project is to find the footing point of the leg of the pipe belt machine after the line is determined. This footing point can be described by stitches.
Comparison and analysis of the cost of tube belt conveyor and fully enclosed corridor belt conveyorTime of issue : 2020- 03-27
On April 28, 2019, the Ministry of Ecology and Environment and other 5 departments jointly issued the "Opinions on Promoting the Implementation of Ultra-Low Emissions in the Iron and Steel Industry", and the summary of the material transport links in the opinions:
Analysis of Hexagonal Support Roller Loose and Falling of Tube Belt MachineTime of issue : 2020- 03-27
For the structure of the hexagonal roller set mentioned in this article, please refer to the description of the structure of the tube support roller with the adjustment structure in the field of adjustment.
In its structure, the end of the roller shaft is not connected with the bracket by screws, but is connected by screws.